eVic AIO features an interchangeable plate which allows to replace the battery or atomizer easily. eVic AIO adopts the best anti-leaking structure with top refilling and top airflow control system. Large 0.96-inch OLED screen, colorful stickers and multiple coil options all make it more practical and attractive catering to your preference. Also, upgradable firmware always enables it up-to-date.
Resistance Range:0.05-1.5ohm under VT/TCR mode,0.1-3.5ohm under VW/BYPASS mode
RTC (Real Time Clock) On Display
Dual Circuit Protection And Reverse Polarity Protection
eVic AIO applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
Having the Onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation.
Detachable Magnetic Cover and Replaceable Battery & Glass Tube
Top Filling And Top Airflow Control
The improved airflow control system allows larger airflow inlet directly from both sides. Simply rotate the airflow ring clockwise or counter-clockwise to adjust the airflow inlet.
E-juice filling can be easily achieved by removing the top cap and injecting through the two side holes (not the vent pipe) directly.
Apply the Atomizer Adapter
Unscrew the airflow ring and remove the whole part. Screw the atomizer adapter tightly with a coin, then you're able to apply multiple types of atomizers with the 510 pin.
eVic AIO comes with the upgradeable firmware.
Having the latest Version 4.02, new interface, multiple modes and functions are available.
NotchCoilTM 0.25ohm DL. Head
We also recommend the NotchCoilTM 0.25ohm DL. (Direct Lung) head which lasts longer and can be used under high wattage condition.
It will surely bring you great vaping experience ever.
Multiple Atomizer Heads Can Be Applied
NotchCoilTM 0.25ohm DL . head, BF SS316 Series Heads, BF Clapton-1.5ohm head, BF Ni, BF Ti and BF RBA head.
Atomizer Head Replacement
Uninstall the atomizer tube, the atomizer head is located on the base, just unscrew it and replace with a new one.
(NOTE: Do not wash the atomizer head with water. Simply scrub it with alcohol cotton or clean dry cloth.)